1 / 2

1 2

Product Summary

9 Total 20A Outlets

6 Rear Panel Outlets Sequenced in 3 Stages

1 Rear Panel Unswitched Outlet

2 Front Panel Unswitched Outlets

Sequenced Output Trigger

Radio Frequency (RFI) and Electromagnetic Interference (EMI) Filters

Dual Clamping Spike & Surge Suppression, DCS Circuitry

Front Panel Digital AC Mains Voltmeter

Emergency Power Down (EPD)

9 Total 20A Outlets

6 Rear Panel Outlets Sequenced in 3 Stages

1 Rear Panel Unswitched Outlet

2 Front Panel Unswitched Outlets

Sequenced Output Trigger

Radio Frequency (RFI) and Electromagnetic Interference (EMI) Filters

Dual Clamping Spike & Surge Suppression, DCS Circuitry

Front Panel Digital AC Mains Voltmeter

Emergency Power Down (EPD)

The AtlasIED ECS-204 is a 20 amp AC Power Sequencer and Conditioner. The ECS-204 has been designed to meet most installation requirements for AC power distribution and equipment power protection. The 20A compact 1 RU unit features four internal sequential timing sections, three on the unit and one to trigger an external device. All can be activated via the unit locally or remotely. Front panel activation is via a momentary switch, while rear activation can be accomplished via a remote momentary switch, latching switch, or by 5-24VDC. AC Mains Voltage can be monitored via the front panel from the precision Digital Volt Meter. The ECS-204 has incorporated dual front panel USB charge ports that can be used to charge devices such as cell phones or music players or the charge port also supports an optional USB gooseneck lamp. The rear of the rack can be illuminated by the optional Atlas Power 16" gooseneck LED lamp (AP-GNL18) connected via an XLR style socket.

If a 20A AC Mains power source is not enough to meet the amperage demand of your system, the ECS-204 provides a sequenced 12VDC or contact closure output (Seq 4) that can be used to trigger other devices such as the AtlasIED ECM-20SH 20A standalone AC power module. Also, up to 3 ECS-204 can be linked together to give you 12 sequenced outputs. Sequence timing selection is made by a rear panel switch selection. There are four choices that range from 3 seconds to 2 minutes.

The ECS-204 incorporates an Emergency Power Down (EPD) feature. The EPD may be required by the local fire code to pass site inspection. This port when activated turns Off all channels at once. Unstable AC Mains voltage is one of the main reasons for equipment failure. AC Spikes, or Transients, are commonly caused by lightning storms or utility power plant grid switchovers. The amount of energy that can be injected into the power system can be immense with voltages reaching 6kV or amperage peaks of 3000A. These spikes are very fast and usually only last for a very short period of time. To protect against this potential problem, the ECS-204 features Dual Clamping Suppression technology (DCS). If a spike intrudes the AC system, the ECS-204 incoming AC Mains has special suppression circuitry to eliminate the unwanted energy and in the unlikely event of any energy getting passed the first stage, each sequenced output section has redundant DCS circuitry clamping the unwanted energy. This circuitry is very fast and can suppress unwanted energy within a nanosecond, while sustaining the suppression up to 2 milliseconds, thus ensuring virtually trouble free protection.

Atlas Sound 20A Power Conditioner & Sequencer ECS-204

Share

SKU: ECS204 | UPC: 612079188888

Authorized Dealer Authorized Atlas Sound Dealer

Manufacturer Warranty Authorized dealer coverage

Expert Support Pre- and post-sale assistance

$828.99

BACK 2 SCHOOL SALE | additional discount in cart

Atlas Sound 20A Power Conditioner & Sequencer ECS-204 $828.99

In Stock Current availability for this model

Free Ground Shipping On qualifying orders to the lower 48 states

Project & Volume Pricing Special pricing available for larger orders

Education & Government Purchase Orders Accepted for qualified organizations

Financing Available with Shop Pay

Special Pricing Available Education • Government • Nonprofits • Corporate • Volume Orders

✓ Tax-Exempt Purchasing Available

Key Features

<ul>\n <li>9 Total 20A Outlets</li>\n <li>6 Rear Panel Outlets Sequenced in 3 Stages</li>\n <li>1 Rear Panel Unswitched Outlet</li>\n <li>2 Front Panel Unswitched Outlets</li>\n <li>Sequenced Output Trigger</li>\n <li>Radio Frequency (RFI) and Electromagnetic Interference (EMI) Filters</li>\n <li>Dual Clamping Spike & Surge Suppression, DCS Circuitry</li>\n <li>Front Panel Digital AC Mains Voltmeter</li>\n <li>Emergency Power Down (EPD)</li>\n</ul>

Product Description

9 Total 20A Outlets

6 Rear Panel Outlets Sequenced in 3 Stages

1 Rear Panel Unswitched Outlet

2 Front Panel Unswitched Outlets

Sequenced Output Trigger

Radio Frequency (RFI) and Electromagnetic Interference (EMI) Filters

Dual Clamping Spike & Surge Suppression, DCS Circuitry

Front Panel Digital AC Mains Voltmeter

Emergency Power Down (EPD)

9 Total 20A Outlets

6 Rear Panel Outlets Sequenced in 3 Stages

1 Rear Panel Unswitched Outlet

2 Front Panel Unswitched Outlets

Sequenced Output Trigger

Radio Frequency (RFI) and Electromagnetic Interference (EMI) Filters

Dual Clamping Spike & Surge Suppression, DCS Circuitry

Front Panel Digital AC Mains Voltmeter

Emergency Power Down (EPD)

The AtlasIED ECS-204 is a 20 amp AC Power Sequencer and Conditioner. The ECS-204 has been designed to meet most installation requirements for AC power distribution and equipment power protection. The 20A compact 1 RU unit features four internal sequential timing sections, three on the unit and one to trigger an external device. All can be activated via the unit locally or remotely. Front panel activation is via a momentary switch, while rear activation can be accomplished via a remote momentary switch, latching switch, or by 5-24VDC. AC Mains Voltage can be monitored via the front panel from the precision Digital Volt Meter. The ECS-204 has incorporated dual front panel USB charge ports that can be used to charge devices such as cell phones or music players or the charge port also supports an optional USB gooseneck lamp. The rear of the rack can be illuminated by the optional Atlas Power 16" gooseneck LED lamp (AP-GNL18) connected via an XLR style socket.

If a 20A AC Mains power source is not enough to meet the amperage demand of your system, the ECS-204 provides a sequenced 12VDC or contact closure output (Seq 4) that can be used to trigger other devices such as the AtlasIED ECM-20SH 20A standalone AC power module. Also, up to 3 ECS-204 can be linked together to give you 12 sequenced outputs. Sequence timing selection is made by a rear panel switch selection. There are four choices that range from 3 seconds to 2 minutes.

The ECS-204 incorporates an Emergency Power Down (EPD) feature. The EPD may be required by the local fire code to pass site inspection. This port when activated turns Off all channels at once. Unstable AC Mains voltage is one of the main reasons for equipment failure. AC Spikes, or Transients, are commonly caused by lightning storms or utility power plant grid switchovers. The amount of energy that can be injected into the power system can be immense with voltages reaching 6kV or amperage peaks of 3000A. These spikes are very fast and usually only last for a very short period of time. To protect against this potential problem, the ECS-204 features Dual Clamping Suppression technology (DCS). If a spike intrudes the AC system, the ECS-204 incoming AC Mains has special suppression circuitry to eliminate the unwanted energy and in the unlikely event of any energy getting passed the first stage, each sequenced output section has redundant DCS circuitry clamping the unwanted energy. This circuitry is very fast and can suppress unwanted energy within a nanosecond, while sustaining the suppression up to 2 milliseconds, thus ensuring virtually trouble free protection.

Purchase Orders

We accept Purchase Orders from all Schools, Universities, Major Government Agencies and Not-for-profit Organizations within the United States and Canada Only. All Purchase Orders are subject to approval.

Simply email, fax or mail your purchase order and please ensure your P/O contains the following information:

Contact name, email address & telephone number. Note: An email address is required to receive order/shipping confirmation.
Billing name & address.
Shipping address.
Tax ID#. For tax exempt orders, please see the Tax Exempt information below.
Purchase Order Number.
Date needed. Please note: Up to 3–5 days are needed to process requests. This does not include delivery time.
Authorized signature. Your purchase order can only be accepted when accompanied by the signature of the officer authorizing the purchase and when submitted on your organization's official purchase order form or letterhead.
Purchase orders must be in excess of $75 excluding shipping. All prices are in USD.
Sales tax is charged only on orders shipping to the state of Florida.

Submit Your Purchase Order

Please email completed purchase orders to Sales@OfficeWonderland.com .

You can also fax it to: (786) 916-5963

Or mail it to:

OfficeWonderland.com
Attn: Purchase Orders
20400 NE 16th PL
North Miami Beach, FL 33179

Once we have all the information requested above, an account and order will be created.

Please Note

Please allow 3–5 days for us to process requests.
Confirmation emails are sent when the order is placed and another email is sent when the order ships.
Please make all checks payable to OfficeWonderland Ltd. at the address referenced above.
Payments on PO orders are due within 30 days.

Terms

We operate with a Net 30 Day payment arrangement for approved purchase orders. Payment is expected to be made in full not more than 30 days after your order is processed.

Atlas Sound 20A Power Conditioner & Sequencer ECS-204

Atlas Sound

Atlas Sound 20A Power Conditioner & Sequencer ECS-204

$828.99

Brightness

N/A

N/A

Weight without stand

N/A

N/A

Weight with Stand

N/A

N/A

Duty Cycle

N/A

N/A

Dimensions

N/A

N/A

Aspect Ratio

N/A

N/A

Content

N/A

N/A

Native Resolution

N/A

N/A

Lumens (ANSI)

N/A

N/A

Contrast Ratio

N/A

N/A

Throw Distance

N/A

N/A

Lens

N/A

N/A

Inputs

N/A

N/A

Outputs

N/A

N/A

Display Technology

N/A

N/A

Wireless Networking

N/A

N/A

Speakers

N/A

N/A

Economode

N/A

N/A

Audible Noise

N/A

N/A

Lamp Life

N/A

N/A

Short Throw

N/A

N/A

Aspect Ratio

N/A

N/A

Image Size Diagonal

N/A

N/A

Lens Shift

N/A

N/A

Data / Video Signals

N/A

N/A

Digital Keystone

N/A

N/A

Unit Weight

N/A

N/A

Projector Methods

N/A

N/A

Dimensions (WxDxH)

N/A

N/A

Dimensions (WxDxH)

N/A

N/A

Contrast Ratio

N/A

N/A

Viewing Angle

N/A

N/A

Response Time

N/A

N/A

Sound Output

N/A

N/A

Screen Size

N/A

N/A

Monitor Configuration

N/A

N/A

Display Orientation

N/A

N/A

WiFi

N/A

N/A

Communication Port

N/A

N/A

Refresh Rate

N/A

N/A

General

N/A

N/A

VESA Pattern

N/A

N/A

TAA Compliant

N/A

N/A

PDF Documents

N/A

N/A

Diagonal Size

N/A

N/A

Dimensions

N/A

N/A

Aspect Ratio

N/A

N/A

Sensor

N/A

N/A

Resolution

N/A

N/A

Signal Sysyetm

N/A

N/A

Signal To Noise Ratio

N/A

N/A

Gain

N/A

N/A

Shutter Speed Range

N/A

N/A

Exposure Control

N/A

N/A

White Balance

N/A

N/A

Image Stabilization

N/A

N/A

Image Flip

N/A

N/A

ICR

N/A

N/A

Sync

N/A

N/A

Output

N/A

N/A

Audio Input

N/A

N/A

Audio

N/A

N/A

Camera Control

N/A

N/A

Focal Length

N/A

N/A

Minimum Object Distance

N/A

N/A

Pan Angle

N/A

N/A

Tilt Angle

N/A

N/A

Pan Speed

N/A

N/A

Tilt Speed

N/A

N/A

Presets

N/A

N/A

Operating Temperature

N/A

N/A

Power

N/A

N/A

Power Consumption

N/A

N/A

Minimum Illumination

N/A

N/A

Optical Zoom

N/A

N/A

TAA Compliant

N/A

EXPERT AV HELP

Need Help Choosing the Right AV Solution?

Our AV specialists can help with product selection, system compatibility, project pricing and complete solutions for commercial, education and government applications.

Speak With an AV Expert Request a Quote